Sylvania SIP3019 instruction manual Saving and Recall a Radio Station Memory

OPERATION

Saving and Recall a Radio Station Memory

1.In radio mode, you select the radio station to storage in memory.

2.Press and hold the MEM button to begin saving the current radio station.

3.Press the FWD/PEV buttons to select a memory slot for the current radio station(P01~P10).

4.Press the MEM button to confirm the selected memory slot.

5.Press the PLAY/PAUSE/MEM-UP button and REPEAT/MEM-DN button to cycle through the saved radio stations.

Using the Auxiliary Input

1.Plug one RCA cable (not included) into the Aux Input (AUX IN) on rear of the unit.

2.Plug the other end of the cable into the audio output / headphone output on an Mp3 Player or Other Audio Source.

3.Press the STANDBY button to turn the unit on.

4.Press the FUNCTION button to switch the unit to AUX mode.

5.Audio played from the Mp3 Player or Other Audio Source will now be heard on the unit.

6.If connecting to the headphone output of an audio source, the source’s volume controls may need to be adjusted for optimal sound.

Using Stereo Headphone Jack

You may connect stereo headphones (not included) to the Headphone jack on the rear of this unit for private listening without disturbing others. When headphones are connected the speakers are automatically shutdown.

IMPORTANT:

Before you connect your headphones, set the VOLUME of this system to a low level. Then connect your headphones, put them gradually increase the volume to a comfortable listening level.

Remember that prolonged listening to loud music at high volume levels headphone or the in-ear type "ear-buds" can result in hearing loss.

12