- 15 - EN
1K09
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TVprograms,
movies, news, pre-recorded tapes with either a dia-
logue caption or text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2:You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
•Automobile ignition noise
•Electric motor brush noise
•Weak snowy reception on TVscreen
•Multiplex signal reception displaying picture ghosts
or airplane flutter.
•Playback of poorly recorded or worn VCR tapes.
•If the TV/VCR displays a black
box on the TVscreen, this means
that the TV/VCR is set to the
TEXT mode. To clear screen,
select [CAPTION1], [CAPTION2]
or [OFF].
Make sure ...
•TV/VCR is turned on.
1Select “CAPTION”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “CAPTION”.
2Select your desired caption
menu
Press the F.FWD/Bor REW/sbut-
ton until your desired caption menu
appears. ([CAPTION1], [CAP-
TION2], [TEXT1] or [TEXT2])
3Exit the caption setting mode
Press the MENU button on the remote control to
return to TVmode.
TO CANCEL THE CLOSED CAPTION SYSTEM
Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton. Press the MENU but-
ton on the remote control to return to TVmode.
WHEN THE CLOSED CAPTION MODE IS ON
The On-Screen Display will disappear after 5 seconds.
•This is also true when the MUTE button is pressed,
and when the PAUSE/STILLbutton is pressed
while recording.
•If there is a power failure of any kind, the unit will
retain its memory for this feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [OFF]
ZERO RETURN
TIME SEARCH
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH

V-CHIPSET UP

Make sure ...
•TV/VCR is turned on.
•You have the TV/VCR remote control.
1Select “V-CHIP SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to select “V-CHIPSET UP”.
Then, press the F.FWD/Bbutton.
2Enter Access code
Use the numbers on the remote
control to enter the access code.
•For the first time set-up or in the
event the TV/VCR has lost power,
enter the default code of the numbers: 0000.
3Select “TV RATING”
Press the PLAY/Kor STOP/Lbut-
ton to select “TV RATING”.
Then, press the F.FWD/Bbutton.
4Blocking TV programs
Press the PLAY/Kor STOP/Lbut-
ton to select “TV rating” that you
wish to block.
•When you select the rating catego-
ry and turn it [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rating will
turn [VIEW] automatically.
•When you turn “TV-Y” to [VIEW], then all ratings
will turn to [VIEW] automatically.
ACCESS CODE
_ _ _ _
V-CHIPSET UP
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
BV-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– V-CHIP SET UP –
BTV RATING
MPAA RATING
CHANGE CODE
BTV–Y [VIEW]
TV–Y7( ) [VIEW]
TV–G [VIEW]
TV–PG( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA( ) [VIEW]
Selection Rating Category Explanations
TV-Y Appropriate for all children
TV-Y7 Appropriate for children seven and older
TV-G General Audience
TV-PG Parental Guidance suggested.
TV-14 Unsuitable for children under 14
TV-MA Mature audience only
T5407UH/7408UJ.QX33 03.1.8 4:14 PM Page 15