Prevention of Accidental Erasure
To prevent erasing a recorded tape accidentally, break off the tabs on the rear of the tape as shown.
Recording on this side is no longer possible. You can stop this being effective by covering the hole with a piece of adhesive tape.
Technical specifications
Power supply |
|
AC | 120V~60Hz |
Batteries | 6 x UM2 LR14 “ C “ Size (batteries not included) |
Radio frequency coverage |
|
F M | 87.5 - 108 MHz |
A M | 530 - 1710 KHz |
CD player |
|
Pick Up | |
Encodin | 1 Bit DA Converter |
| 8 x Oversampling |
Recording system | DC Bias |
Erasing system | Magnetic Erase |
General |
|
Speaker | 8 Ohms |
Headphones | 3.5mm stereo jack plug, |
- 9 -
