SETTING THE CLOCK
1.) Switch the unit to Standby mode by pressing the POWER button.
2.) Press and hold the MEMORY/CLOCK button on the remote.“"24H"”(24 Hour
format) will flash in the display. Press the 
or 
button to select “"12 H"” (12 Hour format).
3.) Press the MEMORY/CLOCK button on the remote. The hour digits will flash.
Press the 
or 
buttons to set the hour. The AM/PM indication will be changed automatically according to the hour setting.
4.) Press the MEMORY/CLOCK button on the remote again. The Hour is now set and the Minute digits will start to flash in the display.
5.) Press the 
or 
buttons to set the minutes.
6.) Press the MEMORY/CLOCK button on the remote again. The Minutes are now set and the clock will start counting.
NOTE:•
Clock time is only retained while the unit is plugged into the AC outlet. In the event of a power failure,the clock will need to be reset when the power
•resumes.
Clock time is only shown when unit is in Standby mode.
8
