Sylvania instruction manual SRCD5670 English 371 x 210mm 17 July 2010 /L, Safety Instruction

PORTABLE CART WARNING (symbol provided by RETAC)

SRCD5670 English (371 x 210mm) 17 July 2010 /L

SAFETY INSTRUCTION

CAUTION

RIKS OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

1.	Read these instructions.
	All the safety and operating instructions should be read before
	the product is operated.
2.	Keep these instructions.
	The safety and operating instructions should be retained for
	future reference.
3.	Heed all warnings.
	All warnings on the product and in the operating instructions
	should be adhered to.
4.	Follow all instructions.
	All operating and use instructions should be followed.

14. Refer all servicing to qualified service personnel. Servicing
	is required when the apparatus has been damaged in any
	way, such as power-supply cord or plug is damaged, liquid
	has been spilled or objects have fallen into the apparatus, the
	apparatus has been exposed to rain or moisture does not
	operate normally, or has been dropped.
15.	Power source.
	This product should be operated only from the type of power
	source indicated on the marking label. If you are not sure of the
	type of power supply to your home, consult your appliance
	dealer or local power company. For products intended to operate
	from battery power, or other source, refer to the operation
	instructions.
16.	Power lines.
	An outside antenna system should not be located in the vicinity

24. Damage requiring service.

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions.

a) When the power-supply cord or plug is damaged.

b) If liquid has been spilled or objects have fallen into the

product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the

operating instructions.

Adjust only those controls that are covered by the

operating instructions, as an adjustment of other controls

may result in damage and will and require extensive work

by a qualified technician to restore in the product to its

normal operation.

Micro System CD Player

with Clock Radio

MODEL: SRCD5670

DANGEROUS VOLTAGE:

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION:

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

DANGER:

Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

LASER SAFETY: This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury.

CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.

FCC WARNING:

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

5. Do not use this apparatus near water.

Do not use this product near water and moisture, for example:

near a bathtub, washbowl, kitchen sink or laundry tub; in a wet

basement; or near a swimming pool.

6. Clean only with dry cloth.

Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a dry cloth for

cleaning.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

Slots and openings in the cabinet and in the back or bottom are

provided for ventilation, to ensure reliable operation of the

product and to protect it from overheating. These openings must

not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug or other

similar surface. This product should never be placed near or over

a radiator or heat source. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's instructions have

been adhered to.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs,

convenience receptacles, and the point where they exit from

the apparatus.

	of overhead power lines or other electric light or power circuits,
	or where it can fall into such power lines or circuits. When
	installing an outside antenna system, extreme care should be
	taken to keep from touching such power lines or circuits as
	contact with them might be fatal.
17.	Overloading.
	Do not overload wall outlets and extension cords as this can
	result in a risk of fire or electric shock.
18. Object and liquid entry.
	Never push objects of any kind into this product through
	openings as they may touch dangerous voltage points or short
	out parts that could result in fire or electric shock. Never spill
	or spray any type of liquid on the product.
19.	Outdoor antenna grounding.
	If an outside antenna is connected to the product, be sure the
	antenna system is grounded so as to provide some protection
	against voltage surges and built up static charges. Section 810
	of the National Electric Code ANSI/NFPA 70 provides
	information with respect to proper to grounding of the mast and
	supporting structure, grounding of the lead-in wire to an antenna
	discharge product, size of grounding conductors, location of
	antenna-discharge product, connection to grounding electrodes
	and requirements for the grounding electrodes.
20.	Service.

Do not attempt to service			ANTENNA LEAD IN WIRE
this product yourself as	GROUND CLAMP
opening or removing
			ANTENNA DISCHARGE
covers may expose you			UNIT
	ELECTRIC SERVICE		(NEC SECTION 810-20)
to dangerous voltage or EQUIPMENT			GROUNDING CONDUCTOR
other hazards. Refer all
			(NEC SECTION 810-21)
servicing to qualified		GROUND CLAMPS
service personnel.		POWER SERVICE GROUNDING
		ELECTRODE SYSTEM

21. Replacement parts.	(NEC ART 250, PART H)
	EXAMPLE OF ANTENNA GROUNDING AS PER
When replacement parts are required,NATIONALbe sureELECTRICALthe serviceCODE

e) If the product has been dropped or the cabinet has been

damaged.

f) When the product exhibits a distinct change in

performance-this indicates a need for service.

25. Note to CATV system installer.

This reminder is provided to call the CATV system

installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way such as the following: the power-supply cored or plug has been damaged, liquid has been spilled into the unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally.

INSTRUCTION MANUAL

Operating Instructions

READ THIS INSTRUCTION MANUAL BEFORE CONNECTING OR OPERATING THIS APPLIANCE. SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over

An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

13.Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

technician uses replacement parts specified by the manufacturer

or those that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire or electric shock

or other hazards.

22.Safety check.

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operation condition.

23.Wall or ceiling mounting.

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.