or high temperatures for extended periods. Long exposure to high temperatures can warp the disc. Do not stick paper or write anything with a ballpoint pen in the label side of the disc.
LOADING AND UNLOADING COMPACT DISCS
Press the Power button to turn the unit on.
Select the CD function by pressing the CD button.
CD plays automatically, when you inject the CD in the unit under CD mode.
Eject the disk at any time by first pressing the stop button and then pressing the EJECT button.
When the Disc exit ,if you do not pick up it within 10 second ,it will go in and reloading automatically.
CAUTION
Do not put anything except a compact disc into the compartment. Foreign objects can damage the mechanism. Never place more than one disc into the disc compartment at any time. If the disc is correctly loaded, the total number of tracks on the disc will be displayed.
Notes: After the disc compartment is fully closed, the disc information may not appear on the display.
This means that the disc is improperly loaded (most likely it is upside down). To check, open the disc compartment again and reload the disc.
DISC PLAY
Insert a CD as described in the previous section and close the disc compartment, it will plays automatically. The display will then show total number of tracks and total playtime, when you press stop button..
Press the PLAY/PAUSE button. Disc play will begin from the start of the first track of the disc. A particular track and be selected using either of the Tuning/Search Forward or REW buttons. If this is done before pressing the PLAY/PAUSE button, disc play will start with the selected track when the PLAY/PAUSE button is pressed. At the end of the disc, the unit will switch to stop mode. When disc is playing , if you press RADOM/AMS, it will Play optional.
NOTES:
If the disc is deeply scratched, or too dirty, disc play may not start. If an improperly centered disc is played, noise can be heard in the mechanism. The use of such discs should be avoided. If the disc is inserted incorrectly, or the disc is damaged the display will show No Disc.
DICS ERRORS:
This compact disc player has
In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play.
This problem may be caused by defects (such as scratches) in the disc being played which are too large for the error compensation circuits to handle. If you encounter this problem, check the CD player operation as follows, before having the unit serviced.
Play a new disc. If the CD player operates normally, the skipping problem is probably due to a defective disc.
TO STOP A CD PART WAY THROUGH
6
