Sylvania SRT22134, SRT22194 Playback, Change Access Code, Inserting a Cassette, Precautions

CHANGE ACCESS CODE

To change access code, follow the steps.

1

Press the MENU button so that the TV/VCR SETUP display appears on the TV screen.

– M E N U –

2	TIMER PROGRAMMING
	PICTURE CONTROL
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
	USER’S SET UP
ton to point to "V-CHIP SET UP".	B V-CHIP SET UP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
Then, press the F.FWD/B button.	ZERO RETURN
	INDEX SEARCH
	TIME SEARCH
3	ACCESS CODE
Use the number buttons to enter 4-		_ _ _ _
digit access code. The default code
is 0000.
4	– V-CHIP SET UP –
	TV RATING
Press the PLAY/K or STOP/L but-
	MPAA RATING
	B CHANGE CODE
ton to point to "CHANGE CODE".
Then, press the F.FWD/B button.

6

Press the MENU button to exit the TV/VCR SETUP.

Note:

•If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

FM MODE (SRC22134 only)

This function enables you to receive FM radio broad- casting.

1Set the FM mode

Press the TV/FM button on the

FM 88.0 MHz

remote control. The radio frequency appears on the TV screen.

2 Select the radio frequency you want to receive

Press the CHANNEL K or L button until your

desired radio frequency appears.

NOTES:

• FM mode is not available for model SRC22194.

5

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 5, making sure you enter the same new code exactly in the confirm code space.

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

• The radio frequency indication repeats to appear

and disappear.

• You can not record the FM radio wave broadcast-

ing.

• If you receive a weak radio signal, you may change

the FM Antenna mode to INT(internal) or

EXT(external) by following the step below.

1)Press the MENU button. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button.

2)Press the PLAY/K or STOP/L button to point to “FM ANTENNA”. Select [INT] or [EXT] using the F.FWD/B or REW/s button.

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

- 17 - EN

9I03