NOTES:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction.
1Insert a tape.
SLOW MOTION
Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.
RENTAL PLAYBACK
2Select “TIME SEARCH” mode
Press the TIME SEARCH button (with each push it will increase by 10 minutes).
3Enter your desired time
TIME SEARCH
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
1 Select “USER’S SET UP” |
Press the PLAY/K or STOP/L but- ton until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)
2 : 50
Press the MENU button on the |
remote control. |
Press the PLAY/K or STOP/L but- |
ton to point to “USER’S SET UP”. |
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
B USER’S SET UP |
LANGUAGE [ENGLISH] |
CAPTION [OFF] |
If you wish to cancel the Time Search at this point, press the MENU button on the remote control.
Then, press the F.FWD/B button. |
ZERO RETURN |
TIME SEARCH |
INDEX SEARCH |
4Begin Time Search
By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.
TO CANCEL THE TIME SEARCH at this point
Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
INDEX SEARCH
An index signal is recorded on the tape automatically when the recording is started. To view a recording at a specific start point:
2 Set “RENTAL” to [ON] | – USER’S SET UP – | |
Press the PLAY/K or STOP/L but- | B RENTAL | [ON] |
ton to point to “RENTAL”. | REPEAT PLAY | [OFF] |
AUTO RETURN | [OFF] | |
Press the F.FWD/B or REW/s button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start playback. “RENTAL PLAY B” appears.
•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
1)Press the MENU button on the | – M E N U – | Repeat steps [1] and [2], select [OFF] using the |
|
PICTURE CONTROL |
| ||
remote control. Press the | TIMER PROGRAMMING | F.FWD/B or REW/s button on the remote control. | |
CHANNEL SET UP | |||
| SETTING CLOCK |
|
|
PLAY/K or STOP/L button to | USER’S SET UP | Press the MENU button on the remote control to |
|
LANGUAGE [ENGLISH] |
| ||
point to “INDEX SEARCH”, | return to TV mode. |
| |
ZERO RETURN |
| ||
| CAPTION [OFF] |
|
|
then press the F.FWD/B button. | TIME SEARCH | If there is a power failure of any kind, the unit |
|
B INDEX SEARCH |
| ||
2)Press the PLAY/K or STOP/L button within 30 | will retain its memory for this feature. |
| |
seconds until the number of programs that you |
|
| |
want to skip appears. |
|
|
|
3)Press the F.FWD/B or REW/s button to start |
|
| |
index search. If you want to go forward, press the |
|
| |
F.FWD/B button. If you want to go back, press |
|
| |
the REW/s button. |
|
|
|
• After index search, the TV/VCR will play the tape |
| ||
automatically. |
|
|
|
• In some cases, the index mark at the beginning of |
|
| |
video tape cannot be detected. |
|
|
|
|
| - 19 - | EN |
