Sylvania SRT2227W owner manual Preparation for USE, Operations

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1)	Connect the power cord to a standard AC outlet.
	Note: If some digits appear in the corner of the screen,
	press the POWER button without unplugging the power cord.
2)	Press the POWER button to turn on the TV.
3)	Press the MENU button so that the menu display appears
	on the TV screen.
4)	Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5)	Select "ENGLISH" or "ESPAÑOL"=Spanish by using
	the VOL(ume) ▲ or ▼ button.

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

PICTURE CHANNEL SET

[ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO PRESET CH

6) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

	CHANNEL PRESETTING
Note: You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button.
To preset a channel or to change a preset channel, follow the procedure below.
1)	Press the POWER button to turn on the TV.
2)	Press the MENU button so that the menu display appears	PICTURE
		CHANNEL SET
	on the TV screen.
		[ENGLISH] ESPAÑOL
3)	Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".	V-CHIP SET UP
		CAPTION [OFF]
	Then, press the VOL(ume) ▲ button.
		TV SOUND [MAIN]
4)	Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH".
	Then, press the VOL(ume) ▲ button.	ADD/DELETE
	The tuner scans and memorizes all active channels in your area.
		AUTO PRESET CH

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting AUTO PRESET CH, the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again after checking antenna connections.

●When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of the channel scanning.

[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV screen.	PICTURE
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".	CHANNEL SET
Then, press the VOL(ume) ▲ button.	[ENGLISH] ESPAÑOL
	V-CHIP SET UP
	CAPTION [OFF]
	TV SOUND [MAIN]

Menu				To show the status, press the DISPLAY
Selection
Menu
Selection	MAIN	MONO	SAP	button on the remote control.
Type of
broadcast
ReRegular	-None-	-None-	-None--
				SAP: Second Audio Program, which
Stereo	STEREO	MONO	STEREO	means your program, can also be
broadcast				received in a second language or
SAP	MAIN	MAIN	SAP	sometimes a radio station.

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".

3)Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) ▲ or ▼ button.

Menu		PICTURE		PICTURE
PICTURE
Selection	MAIN	CHANNELMONOSET	SAP
CHANNEL SET				CHANNEL SET
Type of		[ENGLISH] ESPAÑOL		[ENGLISH] ESPAÑOL
[ENGLISH] ESPAÑOL
broadcast		V-CHIP SET UP		V-CHIP SET UP
V-CHIP SET UP	-None-
CAPTIONRegular[OFF]		CAPTION-None[OFF]-	-None-	CAPTION [OFF]
TV SOUND [MAIN]		TV SOUND [MONO]		TV SOUND [SAP]
Stereo	STEREO	MONO	STEREO
broadcast
SAP

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control.

2)You may change the sleep time by pressing the SLEEP button on the

remote control repeatedly. The timer can be set up to 90 minutes, 10 min-		SLEEP 10
utes each time the SLEEP button is pushed. (The timer dis-
play counts up and sleep timer will be displayed on the screen	To cancel the sleep timer:
when you press the SLEEP button on remote control.)	Press the SLEEP button
Note: When you disconnect the unit from the AC outlet, or if	repeatedly until "SLEEP 0" is
you have a power failure, the sleep time will be lost.	displayed.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".

3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.

4)When done, press the MENU button to exit the menu.

: Press the VOL(ume) ▲ or ▼ button.

PICTURE	PICTURE	PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]	CAPTION [ T1]	CAPTION [ T2]
TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]

GAME MODE							do not press any buttons. Press the MENU
Set to the most suitable position for playback							and VOL(ume) ▲ button so that "PIC-
of video games.							TURE" is selected. Then, press the
[+] : ON [ - ] : OFF							CH(annel) ▲ or ▼ button repeatedly until
BRIGHT							the display returns to the screen.
Adjust until the darkest parts of the picture are						●	If you adjust any picture control after you
as bright as you prefer.							set the Game mode to [ON], the Game mode
[+] : increase brightness				[-] : decrease brightness			is set to [OFF] automatically.
CONTRAST						[USING THE GAME BUTTON]
Adjust to increase or decrease contrast.
						You may also set the Game mode and select
[+] : increase contrast				[ - ] : decrease contrast
						the front A/V input mode at the same time by
COLOR
						pressing the GAME button on the remote con-
Adjust to be brilliant or pale color.
						trol. “GAME” appears on the TV screen.
[+] : be brilliant color				[ - ] : be pale color
						●	To exit the Game mode and front A/V input
TINT
							mode, press the GAME button on the remote
Adjust to obtain natural skin tones.
							control again.
[+] : greenish tone			[ - ] : reddish tone
						●	To cancel the Game mode only, adjust the
SHARPNESS
							picture control. The GAME mode will be set
Adjust to detail in the picture.
							to [OFF] automatically as explained in the
[+]:increase sharpness [-]:decrease sharpness
							previous section. In this case, “VIDEO”
Notes:
							(external input mode) instead of “GAME”
● “+” is achieved by pressing the VOL(ume)							appears on the TV screen.
▲ button and “-” by pressing the						●	If you press the GAME button when the TV
VOL(ume)▼ button.							is off, the TV turns on and will be in the
● In the above steps, the picture adjustment							Game mode and will select the front A/V
display will disappear from the TV screen							input mode automatically.
automatically after about 10 seconds if you
	: Press the CH(annel) ▲ or ▼ button.
[-]GAME MODE	[+]	[-]	BRIGHT [+]		[-]CONTRAST [+]	[-]	COLOR [+]	[-] TINT [+]	[-]SHARPNESS [+]
OFF	ON

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen.

To block certain ratings, follow the steps in the next page.

●Programming may be rated by the Motion Picture Association of America (MPAA) or accord- ing to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

●You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to an unblocked channel, then press the MENU button.