ADD/DELETE
AUTO MEMO
CHANNEL SET LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SECTION
CHANNEL SET LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO

SET UP FOR USE

Getting started

1

Connect the power cord to a standard AC outlet. NOTE: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2

Press the POWER button to turn on the TV/DVD.

3

Press the SELECT button on the remote control until channel number or "TV" appears on the screen.

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1

CHANNEL SET

Press the SETUP button so that the

LANGUAGE [ENGLISH]

ESPAÑOL

setup display appears on the TV

FRANÇAIS

V-CHIP SET UP

screen.

CAPTION [OFF]

 

 

2

CHANNEL SET

Press the Arrow K or L button to

LANGUAGE [ENGLISH]

ESPAÑOL

point to "LANGUAGE".

FRANÇAIS

V-CHIP SET UP

 

CAPTION [OFF]

3

Select "ENGLISH", "ESPAÑOL" = Spanish or "FRANÇAIS" = French by using the Arrow s or B button.

4

Press the SETUP button to exit the setup. NOTE: An on-screen display language must be selected each for the TV mode and DVD mode.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

2

Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button.

3

Press the Arrow K or L button to point to "AUTO MEMO". Then, press the Arrow B button.

The tuner scans and memorizes all active channels in your area.

The TV distinguishes between standard TV chan- nels and cable channels.

When AUTO MEMO action is completed, the low- est memorized channel reappears on the screen.

When you press the Arrow K or L button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.

The TV/VCR may memorize TV channels as CATV channels if reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.

[ADD/DELETE FUNCTION]

1)Press the SETUP button so that the setup display appears on the TV screen.

2)Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button.

3)Press the Arrow K or L button to point to "ADD/DELETE". Then press the Arrow B button.

4)Use the Arrow K or L button to

select the channel you wish to

put into memory or to erase from memory. NOTE: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" func- tion while this display appears on the screen.

Press the Arrow s or B button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

Press the Arrow s or B button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.

5)Press the SETUP button to exit the setup.

1

Press the SETUP button so that the setup display appears on the TV screen.

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

– 15 –

EN

0C28

Page 15
Image 15
Sylvania SRTD219 owner manual SET UP for USE, Language Selection, Channel Presetting, ADD/DELETE Function