TIME SEARCH
The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
NOTES:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction.
1Insert a tape.
2Select “TIME SEARCH” mode
Press the TIME SEARCH button (with each push it will increase by 10 minutes).
3Enter your desired time
TIME SEARCH
Press the PLAY/K or STOP/L but- 2 : 50 ton until your desired time appears.
3)Press the F.FWD/B or REW/s button to start index search. If you want to go forward, press the F.FWD/B button. If you want to go back, press the REW/s button.
•After index search, the TV/VCR will play the tape automatically.
•In some cases, the index mark at the beginning of video tape cannot be detected.
SLOW MOTION
Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
(Example: “2:50” stands for 2 hours 50 minutes)
If you wish to cancel the Time Search at this point, press the MENU button on the remote control.
4Begin Time Search
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH INDEX SEARCH
By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.
TO CANCEL THE TIME SEARCH at this point
Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
INDEX SEARCH
An index signal is recorded on the tape automatically when the record- ing is started. To view a recording at a specific start point:
1)Press the MENU button on the
remote control. Press the PLAY/K or STOP/L but- ton to point to “INDEX SEARCH”, then press the F.FWD/B button.
2)Press the PLAY/K or STOP/L button within 30 seconds until the number of programs that you want to skip appears.
2 Set “RENTAL” to [ON] | – USER’S SET UP – | |
Press the PLAY/K or STOP/L but- | B RENTAL | [ON] |
ton to point to “RENTAL”. | REPEAT PLAY | [OFF] |
AUTO RETURN | [OFF] | |
Press the F.FWD/B or REW/s button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start playback. “RENTAL PLAY B” appears.
•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
- 19 - | EN |
9I03
