FM MODE
This function enables you to receive FM radio broad- casting.
NOTES:
• FM mode is not available for model SRC22194. |
• The radio frequency indication repeats to appear |
and disappear. |
• You can not record the FM radio wave broadcast- |
1Set the FM mode
Press the TV/FM button on the remote control. The radio frequency appears on the TV screen.
FM 88.0 MHz
ing. |
• If you receive a weak radio signal, you may change |
the FM Antenna mode to INT(internal) or |
EXT(external) by following the step below. |
2Select the radio frequency you want to receive
Press the CHANNEL K or L button until your desired radio frequency appears.
1)Press the MENU button. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button.
2)Press the PLAY/K or STOP/L button to point to “FM ANTENNA”. Select [INT] or [EXT] using the F.FWD/B or REW/s button.
PLAYBACK
This TV/VCR will operate with any cassette that has the 
mark. For best results, we recommend the use of
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but continuously, on the
Window
CORRECTWRONG
PRECAUTIONS
•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.
•Avoid extreme heat, high humidity and magnetic fields.
•Do not tamper with the cassette mechanism.
•Do not touch the tape with your fingers.
NORMAL PLAYBACK
Make sure ...
•TV/VCR power must be turned on.
1Insert a prerecorded tape
If the
2To begin playback
Press the PLAY button. | PLAY B |
Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but- ton to clear the menu, then press the PLAY button.
3To stop playback
Press the STOP button when playback is completed.
- 17 - | EN |
9I03
