RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
DVD 
CD
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD 
CD
1Press the PAUSE button during playback.
1Press the STOP button during playback.
¡Playback will stop, and then appear the resuming message at
Press 'PLAY' to play from here.
the center.To play the beginning, press 'STOP' first and then 'PLAY'.
¡Playback will pause, with sound muted.
F
2Press the PLAY button. Playback will start from the point where the previous playback session was stopped.
B
Notes
¡Resuming playback is not available with some discs.
¡It is possible to switch from the DVD play mode to the TV mode. Even if the power is turned off, the resume function enables to playback on from the previously interrupted point. But note that the Marker commands are not saved.
¡The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray.
2Press the PLAY button to resume playback.
B
STEPPING THROUGH FRAMES
DVD
1Press the PAUSE/STILL button while play- back is paused.
¡The next picture frame is dis- | F |
|
played with sound muted each time the button is pressed.
FAST FORWARD/REVERSE
| DVD |
| CD |
| 2 Press the PLAY button to resume playback. | |||
|
|
|
|
|
| |||
1 Press and hold the g or h button for |
|
|
| |||||
| B |
| ||||||
more than 1 second during playback.
¡For DVDs, pressing the FWD gor REV hbut- |
| |
ton cycles the playback speed in four steps. In case |
| |
of DVDs, the sound will mute. |
|
|
¡For audio CDs, the playback speed is ⋅16 fixed. |
| |
REV E Button | FWD D Button |
|
Ex2 | Dx2 |
|
Ex8 | Dx8 |
|
Ex30 | Ex30 |
|
Ex60 | Ex60 |
|
2 Press the PLAY button to return to normal |
| |
playback speed. | – 38 – | EN |
| ||
01A11
