2-8PDT 1100 Terminal DLL Guide
+Fn Sets the number of digits for fields for a data file to be sent. ----
+F<Item1.fieldlength>[,<Item2.fieldlength>,
......<Itemn,field length>]
(n=1 to 16<Cfieldlength=1 to 254>
<Example> If a file consists of three fields whose lengths are as follows:
<Item1.field>=13,<Item2.field>=20,<Item3.field>=6
+F13,20,6
+I,-I Determines whether to initialize the IR device. -I
+I“<DLLfil
ename>”
Initializes the IR device specified by <DLLfilename> at the
start of file transmission. The <DLLfilename> should be
It3exxxx.dll (except It3ew32d.dll) enclosed by double
quotes. Specify the DLL file name of the IR device to be
used following the +I.
-I Does not initialize the IR device.
+R, -R Sets the transmiss ion direction. -R
+R Creates a receive file with the specified file name in the
specified directory, and receives a file. If you specify more
than one file, an error occurs.
-R Transmits the specified file. If you specify more than one
file, an error occurs.
+N, -N Determines whether to check the name of a received file. When the +R
is specified, the DLL compares the file name used in the PDT 1100 with
the received file name. If any discre pancy is found, an error occurs. T his
command switch is ignored when the -R is specified.
-N
+N Checks the file name.
-N Does not check the file name.
+A, -A Determines wh ether to add a received file data to the existin g data file. -A
+A Adds a received file data to the tail of the existing data file.
-A Overwrites the existing data file with a received data file.
Table 2-1. Options (Continued)
Options Functions Defaults