Symphonic CWF719 Changing V-CHIP Blocked PRO- Gramming, Mpaa Rating SET UP, Change Access Code

ACCESS CODE

_ _ _ _

– V-CHIP SET UP –

TV RATING MPAA RATING

B CHANGE CODE

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

CHANGING V-CHIP BLOCKED PRO- GRAMMING

Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected.

1)Follow steps [1] and [2].

2)Press the Arrow button K or L to select "TV RAT- ING". Then, press the ENTER button. Select a TV rating to be unblocked by pressing the Arrow but- ton K or L.

Then press the ENTER button to unblock the rating. 3)Press the SETUP button on the remote control to

exit the screen.

MPAA RATING SET UP

1 Select “V-CHIP SET UP”	- TV/VCR SETUP -
	TIMER PROGRAMMING
Press the SETUP button on the	SETTING CLOCK
	USER’S SET UP
	CHANNEL SET UP
remote control.	B V-CHIP SET UP
	CAPTION [OFF]
	LANGUAGE [ENGLISH]
Press the Arrow button K or L to	ZERO RETURN
	TIME SEARCH
select “V-CHIP SET UP”. Then,	INDEX SEARCH
press the ENTER button.
2 Enter Access code	ACCESS CODE
Use the number buttons on the
remote control to enter the access
		_ _ _ _
code.
3 Select “MPAA RATING”	– V-CHIP SET UP –
Press the Arrow button K or L to	TV RATING
	B MPAA RATING
point to “MPAA RATING”.	CHANGE CODE
Then, press the ENTER button.

4Select your desired item

Press the Arrow button K or L to		G	[VIEW]
point to your desired item.		PG	[VIEW]
		B R	[BLOCK]
		PG–13	[VIEW]
Then, press the ENTER button to		NC–17	[BLOCK]
		X	[BLOCK]
select [BLOCK] or [VIEW].
Selection	Rating Category Explanations
G	General Audience
PG	Parental Guidance suggested.
PG-13	Unsuitable for children under 13

RRestricted; under 17 requires accompa- nying parent or adult guardian

NC-17 No one under 17 admitted
X	Mature audience only

5Exit the V-Chip setting mode

Press the SETUP button on the remote control to exit the screen.

CHANGE ACCESS CODE

To change access code, follow the steps.

1Select “V-CHIP SET UP”

Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”.

Then, press the ENTER button.

2 Enter Access code

Use the number buttons on the remote control to enter the access code.

The default code is 0000.

3 Select “CHANGE CODE”

Press the Arrow button K or L to select "CHANGE CODE". Then, press the ENTER button.

4Enter New code

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.

5Exit the V-Chip setting mode

Press the SETUP button on the remote control to exit the screen.

Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

•When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

•When you turn “G” to [VIEW], then all ratings will turn to [VIEW] automatically.

- 22 - EN

1C29