Symphonic RSMWD2205 Preparation for Use, Turn On the Unit for the First Time, Clock Set Up

Preparation for Use

Turn On the Unit for the First Time

VCR

VCR

1

Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broadcasting, see“RF Output Channel” section.

To Add/Delete Channels

1	MENU	- M E N U -
		TIMER PROGRAMMING
		AUTO REPEAT [OFF]
		B CHANNEL SET UP
		CLOCK SET
		LANGUAGE SELECT
		• If the clock is not set, the
	or	CLOCK SET screen
		appears when you hit

[MENU]. In this case, hit

[MENU] again.

Hint

•If you accidentally select Spanish or French and need English: hit [MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Hit [B] and select ENGLISH. Finally, hit [CLEAR/C.RESET].

Clock Set Up

VCR

VCR

1	MENU	- M E N U -
		TIMER PROGRAMMING
		AUTO REPEAT [OFF]
		CHANNEL SET UP
		B CLOCK SET

2	STANBY-ON	Remote Control	TV Screen
		LANGUAGE SELECT
		B ENGLISH	[ON]
Setup		FRANÇAIS
		ESPAÑOL
	or

3	CH 01
	AUTO SET UP

Do you connect the cable from the cable box or the satellite box to the unit’s ANT-IN jack?

YES

Yes Hit [MENU] to exit.

•Refer to “Hint for Cable Box or

Satellite Box” section on page 6. NO

No Please wait for a few minutes.

After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memorized in this unit by using [SKIP/CH. G/KH/L] (or [CHANNEL K/L]).

•If "AUTO SET UP" appears on the TV screen again, check the cable connections. Then, hit [B] once again.

Hint

•Repeat these steps only if either there was a power failure or this unit has been unplugged for more than 30 seconds.

To Select a Channel

You can select a channel using the Number buttons or

[SKIP/CH. G/KH/L] on the remote control.

Notes for using the Number buttons:

•When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, hit [1], [1], [7])

•You must precede single-digit channel numbers with a zero (for example: 02, 03, 04 and so on).

2CHANNEL SET UP

AUTO SET UP B MANUAL SET UP

or

3MANUAL SET UP

CHANNEL 30 (CATV)

ADD

or

Select the channel to be added or deleted.

4		MANUAL SET UP
		CHANNEL 30 (CATV)
	or	DELETE
		Select “ADD” or “DELETE”.
5	To exit the	CLEAR/
	menu	C. RESET

To Preset the Channel Again

1)Hit [MENU] until the main menu appears.

2)Select “CHANNEL SET UP” by pressing [K/L], then hit [B].

3)Select “AUTO SET UP” by pressing [K/L], then hit [B]. After scanning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

1)Hit [MENU] until the main menu appears.

2)Select “LANGUAGE SELECT” by pressing [K/L], then hit [B].

3)Select “ENGLISH” , “FRANÇAIS” or

“ESPAÑOL” by pressing [K/L], then hit [CLEAR/C.RESET].

	LANGUAGE SELECT
	• If the clock is not set, the
or	CLOCK SET screen
	appears when you hit
	[MENU]. In this case, go
	to step 2).
2		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ – –	– – – –
or	HOUR MINUTE		AM/PM
	– –	: – –	– –
	Select the current month.
3		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 3	– – – –
or	HOUR MINUTE		AM/PM
	– –	: – –	– –

Select the current day.

4		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 3	2 0 0 5
or	HOUR MINUTE		AM/PM
	– –	: – –	– –

Select the current year.

5		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 3 MON 2 0 0 5
or	HOUR MINUTE		AM/PM
	0 5	: – –	– –

Select the current hour.

– 8 – EN