- 14 - EN
9J27
DELETING (OR ADDING)CHANNEL
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
1Select “CHANNEL SET UP”
Press the MENU button on the
remote control. Then press the
PLAY/Kor STOP/Lbutton to
point to “CHANNELSET UP”.
Then, press the F.FWD/Bbutton.
2Select “ADD/DELETE CH”
Press the PLAY/Kor STOP/Lbut-
ton to point to “ADD/DELETE
CH”.
Press the F.FWD/Bbutton.
3Enter the desired channel number
Press the PLAY/Kor STOP/Lbut-
ton until your desired channel num-
ber appears. (You can also use the
number buttons or the CHANNEL
K/Lbutton to enter it.) (Example:
CH8)
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
BCHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
BADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
08
ADD / DELETE
4Delete (or add) it from (into) memory
Press the F.FWD/Bor REW/sbutton. The channel
number changes to light red. The channel is deleted
from memory.
•To delete another channel, repeat steps [3] and [4].
•If you press the F.FWD/Bor REW/sbutton
again, the channel is memorized again.
5Exit the channel setup mode
Press the MENU button on the remote control to
returns to TVmode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNELKor Lbutton.
Added channel:Light blue .
Deleted channel: Light red.
CHANNEL SET UP
Make sure ...
•Press the POWER button to turn on the TV/VCR.
1Select “CHANNEL SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “CHANNELSET
UP”.
Then, press the F.FWD/Bbutton.
2Begin auto ch programming
Press the PLAY/Kor STOP/Lbut-
ton to point to “AUTO CH PRO-
GRAMMING”.
Then, press the F.FWD/Bbutton.
The tuner scans and memorizes all
the active channels in your area.
3After scanning
The tuner stops on the lowest memorized channel.
•When AUTO CH PROGRAMMING is activated
where there is no TVsignal input, “NO TV SIG-
NALS” will appear on the display after the com-
pletion of the channel scanning.
•The TV/VCR may recognize TVchannels to be
CATVchannels by the receiving conditions. In this
case, try auto ch programming again in the fine
receiving conditions.
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/VCR channel selector to the
output channel of the cable box or satellite box (Ex
CH3). Then select the channel to be viewed on the
Cable Box or Satellite Box.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
BCHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
BAUTO CH PROGRAMMING