SPECIFICATION |
| CYCLONE 1.1 | CYCLONE 2.1 |
Power output | 70W | 100W | |
Distortion 1KHz 10W 8Ohms | <=0.01% | <=0.008% | |
S/N Ratio |
| <= | <= |
Residual noise |
| <= | <= |
Frequency response | +/- 3dB | +/- 3dB | |
Dimensions H.W.D in mm excluding connections | 93x430x300 | 93x430x300 | |
Weight | packed | 8.90kg | 8.90kg |
| 7.50kg | 7.50kg |
Talk Electronics’ policy of continued research and development means that the above specification may change without notice.
The Cyclone has been manufactured to conform with the protection requirements of the EC Council directive 89/336/EEC relating to EMC by application of the following standards:
and also the requirements of the EC low voltage directive relating to electrical safety by application of the following standard BSEN60065: 1994 Safety standard
For the purposes of testing the Cyclone was used with the mains cables and high quality interconnects supplied by Merlin Cables. Compliance with the above standards can only be made if the unit is installed as per this manual and using the correct cables.
Guarantee: 3 Years return to dealer.
To help us provide you with the most efficient service please return your guarantee card promptly. Your integrated amplifier is guaranteed against manufacturing and component defects for a period of 3 years. The guarantee does not cover and damage caused by accident, misuse, neglect or through incorrect installation, adjustment or repair by unauthorised personnel or the cost of collecting the Cyclone from you and returning it to the dealer. The above does not effect your statutory rights as a consumer. E & OE
Talk Electronics
TALK ELECTRONICS LTD. UNIT 3 IMAGE HOUSE 326 MOLESEY ROAD HERSHAM SURREY KT12 3PD ENGLAND
TEL: +44 (0)1276 709966 FAX: +44 (0)1276 682843
www.talkelectronics.com