ATTACHING LENS TO CAMERA *How to mount the lens
Removing the rear cap of the lens, align the lens attachment mark on the lens barrel with its counterpart on the lens mount of the camera and insert the lens mount into camera's mount opening. Rotate the lens clockwise until it
*How to detach the lens
Pressing the lens release button of the camera down, turn the lens counterclockwise (in case of Nikon lens, clockwise), and lift the lens off the camera's lens mount.
**For further details, please read the instruction manual of your camera.
FOCUSING (Autofocus)
Set the camera on the autofocus mode (AF). Press the shutter button lightly while viewing through the cameras viewfinder, the lens focuses automatically. An
*When set on AF mode, be very careful not to hinder the autofocusing movements of the lens. Such interference may cause serious damage on the lens mechanism. *Select between the autofocus and manual focus modes by the AF/MF switch on the camera in case of Nikon, Minolta, or Pentax lens. The lens for Canon cameras has an AF/MF mode selector switch on the lens barrel.
**For further details, please read the instruction manual that came with your camera.
FOCUSING (Manual Focus)
*Switch the focusing mode switch of the camera to manual focusing mode (MF) in case of Nikon, Minolta or Pentax camera and in case of Canon, switch to MF on the
*Press the shutter button lightly while operating the lens for focusing. The focus aid mark in the viewfinder will light up when the subject is in critical focus.
*Make sure the subject at infinity appears sharp in the finder when in focus. You should do this for the reason that the infinity position on the lens is made to assure correct focus under a wide variety of photographing conditions.
**For further details, please read the instruction manual of your camera.
*The minimum photographing distance of the A061 is constant at 0.49 m throughout the entire zoom range. There is therefore, no minimum distance scale on the lens bar- rel.
