Tamron AFB005C700, AFB005NII700 How to detach the lens, Focusing Autofocus, Focusing Manual Focus

ATTACHING AND REMOVING THE LENS * How to mount the lens

Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel with its counterpart on the camera mount and insert the lens.

In case of Nikon mount, rotate the lens counter-clockwise until it clicks into the locking position. In case of Canon mount, rotate the lens clockwise until it clicks into the locking position.

* How to detach the lens

Press the lens release button on the camera down.

In case of Nikon mount, rotate the lens clockwise until it unlocks from the camera. In case of Canon mount, rotate the lens counter-clockwise until is unlocks from the camera.

*For further details, please read the instruction manual of your camera.

FOCUSING (AUTOFOCUS)

Switch the AF/MF switch on the lens to AF (Fig. 5). In case of Nikon camera with the focus mode selector dial, set the focus mode to “S” or “C”, and then set the AF/MF switch on the lens side to “AF”. Press the shutter button lightly while viewing through the camera’s viewfinder. The lens focuses automatically. An in-focus mark will light when lens focuses on the main subject sharply. Press the shutter button further to photograph.

*When set on AF mode, interfering with the focusing ring may cause serious damage to the lens mechanism.

*The distance scale is marked for guidance purposes. The actual focal point may slightly differ from the distance marked on the focal length index.

FOCUSING (MANUAL FOCUS)

Switch the AF/MF switch on the lens to MF (Fig. 6). In case of Nikon camera with the focus mode selector dial, set the focus mode to “M”, and then set the AF/MF switch on the lens side to “MF”. Focus manually by rotating the focusing ring while viewing through the camera’s viewfinder. The main subject in the viewfinder will be sharp when the lens id focused correctly.

*Even when in MF mode, turning the focusing ring while pressing the shutter button halfway, the focus aid function lamp lights up when the picture is in focus.

*At infinity, make sure the image in the viewfinder appears sharp. The infinity position is made with certain allowances to insure proper focus under a variety of conditions.

*For further details, please read the instruction manual of your camera.

VC Mechanism

VC (Vibration Compensation) is a mechanism which reduces the image blur caused by hand-held shooting. When using the VC, pictures can be taken at shutter speeds up to a maximum of 4 stops slower than the speed when the VC is not used.