3G Gateway Installation
1 | 2 | 3 |
LAN1 LAN2 LAN3 | LAN4 |
|
|
| |
| LAN4 LAN3 LAN2 | LAN1 |
Unpack the 3G Gateway. | Mount the rack ears and/or rubber feet, if |
| applicable, and turn the unit back on its feet |
| or mount it in the rack. |
LAN1 LAN2 LAN3 | LAN4 |
|
Connect the Ethernet LAN cable to socket LAN 1. Connect the null modem cable between the Data socket and a PC.
4a | 4b |
| 4c |
| I | I | I |
| o | o | o |
Depending on version, connect the PRI connector … | or... | connect the 4 PRI connectors … | ||
5 | I | 6 | ||
o | ||||
|
|
| ||
| I |
|
| |
| o |
|
| |
Connect the power cable and turn on the 3G |
|
| ||
Gateway. Use the LCD display of the unit to set |
| Start a Terminal program on the PC | ||
the IP address – see Configuring the 3G Gateway |
| and configure it to 115 200, 8, 1, None | ||
in the User Manual for details, or... |
|
|
| |
or... | … connect the 4 BRI connectors. |
1.Start a Terminal program on the PC and configure it to
115 200, 8, 1, None
2.When prompted for login, enter username admin and password TANDBERG.
3.Type y to start the installation wizard and press Enter.
4.When prompted, specify a new password, IP settings, lo- cal prefix, SSH y/n, and Telnet y/n.
5.When prompted for login, enter username admin and your new password.
6.Press Enter to skip the installation wizard.
7.Reboot the system by typing the command xcommand boot
8.Do the rest of the configuration from the web interface.
115196 rev. 02
