Starting Up the 3G Gateway
TANDBERGTANDBERG3G3GGATEWAYateway
USERUSERGUIDEGUIDE
3G Gateway
To start the 3G Gateway, simply connect the power cable, and set the power switch button (both at the rear) to position I.
Power switch
On the front panel of the system the power indicator LED, marked Pwr, will turn GREEN.
Accessing the 3G Gateway
You may access the 3G Gateway by entering the IP- address of the 3G Gateway in a standard
enter a password. You will need to enter admin as user name. The default
password for the 3G Gateway is TANDBERG. Remember that the password is case sensitive. Note that you may also use SSH and Telnet to configure the 3G Gateway.
User name is admin
PASSWORD. Default password is TANDBERG (NB! case sensitive)
Forgot the Password?
Reboot the 3G Gateway.
Connect to the 3G Gateway via the serial interface once it has restarted.
Login with User Name pwrec. No password is required.
You will be prompted for a new password.
The pwrec account is active for one minute following a restart. Beyond that time, the system will have to be restarted to change the password.
Table of |
| Trademarks | & | Patents & |
| Safety/ | To | Get You | Using the | 3G | Viewing the |
| Configuring |
| Maintenance |
| Services |
| Dial Plan |
| Contact | |
Contents |
| Copyright |
| Disclaimers |
| Environmental | Up | and Going | Gateway |
| System Status | the | 3G Gateway | & | Upgrade |
|
| Examples |
| Information | ||
|
|
|
|
|
|
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D13841.08 |
|
|
|
|
|
|
| 17 |
|
|
|
|
|
|
|
|
|
|
| |||
10.2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|