TANDBERG D14306.01 manual Waking up the system

What’s in this guide? GettingGett startedrted Making calls

Waking up the system

To make a call you need to wake up the system from standby. However, if someone calls you, the system will wake up by itself.

•To wake up the system just pick up the remote control or press any key. You may have to point the remote control towards the system to make it discover you.

•The system will now show the welcome screen, which contains the main menu and it will display the main camera image in the background.

•The IP number (whenever applicable) and the system name are displayed in the upper left corner.

•The IP number is the dial-in number of your system.

•The screen will also indicate if there are any calls you have missed.

D14306.01 USER GUIDE TANDBERG CODEC C90—NOVEMBER 2008

Using the phone book In-call features Video conferencing

After wake-up, the screen will typically look like this:

The IP number of your system is	Date and
the dial-in number of your system.	time of day.
alice.wonderland@mycompany.com

Softkeys (described on the following pages).

Should the system fail to respond to the remote control or to incoming calls, make sure that:

•The system is connected to line voltage

•The remote control has working batteries

•The internal cables, such as the monitor cable and/or the camera cables are properly connected, cf. the installation sheet.

4