PREPARATION
Connecting to AC Power
Plug the clock’s power cord into a stan- dard AC outlet.
The display flashes when you first plug in the clock or when the power is inter- rupted and the
•The backup battery only powers the clock (not the light).
Follow these steps to install the back- up battery.
1.Press the tab and remove the bat- tery compartment cover.
2.Snap the battery onto the termi- nals and place it inside the battery compartment.
3.Replace the cover.
Installing the Backup Battery
To keep the clock running during an AC power failure, install a
Notes:
•To prevent unnecessary battery drain, install the battery after you connect the radio to AC power.
•If the BATTERY SENTINEL indi- cator lights after an AC power fail- ure, or when you press SNOOZE, the battery is too low to power the clock. Replace the battery and set the time.
OPERATION
Setting the Time
1.While holding down TIME, repeat- edly press (or press and hold down) HOUR until the clock dis- plays the correct hour.
2
