REMOTE CONTROL
Installation of batteries
Remove the cover as illustrated.
Replace the cover.
Position two batteries of the type AAA/R03/UM4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom).
Do not mix new and old batteries and do not use different types of batteries.
If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion.
Using the remote control
Direct the remote control at the sensor on the front panel of the unit. When the remote control signal is received, the unit reacts accordingly. The remote control works within a range of 6 metres.
TUNING
POWER
FM/AM | AUTOTUNE | MEMORY | - PRESET + | ST/MONO | RESET |
Infrared-
Sensor
+ +
+
Sometimes the remote control does not work well in strong light. You may have to move the unit if it is a problem.
Malfunction may occur if other remote controls are used near the unit.
Do not place any objects on the remote control, as the batteries may become flat if a key is depressed constantly.
Make sure that there are no obstacles between remote control and unit.
Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control.
08
