BF-541 Body Fat Monitor/Scale

Press the Green Arrow and

Orange Set buttons simultaneously.

Press the Green Arrow button to choose your measurement mode (lb/kg/st-lb), then press the Orange Set button.

Open as shown

Direction of the batteries

Useful Features of the BF-541

•The BF-541 allows you to measure both weight and body fat percentage simultaneously as easily and simply as stepping on a scale.

•The BF-541 can be set for an Adult or Child, Male or Female, increasing the accuracy of the reading.

•Personal data (Adult/Child, Male/Female and Height) can be stored in the memory of the unit for up to four people.

•Weight only key provides quick weight only readings.

Switching the Weight Mode

The BF-541 can record measurements in lb (pounds), kg (kilograms) or st-lb (British stone pounds). To select the preferred mode, make sure the monitor is off. Press the Green Arrow and Orange Set buttons simultaneously. Press the Green Arrow button to choose your measurement mode (lb/kg/st-lb), then press the Orange Set button. The display screen will flash to confirm your selection and store it in memory. (To change weight mode, repeat the previous steps.)

Automatic Shut-Down Function

The automatic shut-down function shuts off the power automatically in the following cases:

•If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds, depending upon the type of operation.

•If an extraordinary weight is applied to the platform.

•If you make a mistake during measurement or a key or button operation.

•After you have completed the measuring process.

Note: If the power shuts off unexpectedly, repeat the measuring process.

Preparations Before Use

Inserting the Batteries

1.Locate the battery cover on the back of the measuring platform. Press the tab to release the cover as shown.

2.Insert the supplied AA-size batteries as indicated.

Note: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly positioned, the fluid may leak and damage floors. If you do not intend to use this unit for a long period of time, it is advisable to remove the batteries before storage.

Positioning the Monitor

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement.

Note: To avoid possible injury, do not step on the edge of the platform.

Attaching the Support Feet (Carpet Use Only)

Insert the support feet into the holes at the four corners on the bottom of the measuring platform.

Note: Do not use the monitor on any carpeting that is more than 0.8 inch in thickness.

Do not use the support feet on hard, flat surfaces, as the unit may tip over.

4