Setting and Storing Data in Memory
The
The
The
1. Turn on the Power
When programming data, use the Orange Set button to turn the unit on. The register numbers
2. Select a Personal Key
Use the Green Arrow button to select a Personal key, then press the Orange Set button.
3. Select Adult or Child
Use the Green Arrow button to specify Adult or Child, then press the Orange Set button.
Adult = age 18 or older. |
|
Child = up to the age of 18, over 3 ft 4 in (102 cm). | ADULT |
| CHILD |
Turn the unit on.
Select | Store in memory. |
“1, 2, 3 or 4.” |
|
4. Select Male or Female
Use the Green Arrow button to select Male or Female, then press the Orange Set button. () Male () Female
5. Specify the Height
Use the Green Arrow button to specify Height in feet and inches. Then press the Orange Set button.
The display will flash all data (Adult/Child, Male/Female and Height) for three seconds to confirm the programming. The power will automatically turn off.
Select Adult | Store in memory. |
or Child. |
|
Select Male | Store in memory. |
or Female. |
|
Getting Accurate Readings
To get the most accurate absolute values, readings should be taken without clothing and under consistent conditions of hydration. If you do not undress, always remove your socks or stockings, and be sure the soles of your feet are clean before stepping on the measuring platform. Stand erect on the platform.
Note: An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting position.
It is best to take readings at the same time of day. Remember to wait about three hours after rising, eating, or hard exercise before taking measurements. While readings taken under other conditions may not have the same absolute values, they are accurate for determining the percentage of change as long as the readings are taken in a consistent manner. To monitor progress, compare weight and body fat percentage taken under the same conditions over a period of time.
FemaleMale
Specify Height. | Store in memory. |
Confirmed data will flash for three seconds.
5