Di5a
TannoyUnited Kingdom
TannoyNorth America
TannoyDeutschland
TannoyFrance
T:00 44 (0) 1236 420199
T:00 1 (519) 745 1158
T:00 49 (180) 1111 881
T:00 33 (0)1 7036 7473
E:enquiries@tannoy.com
E:inquiries@tannoyna.com
E:anfragen@tannoy.com
E:ventes@tannoy.com
Tannoyadoptsa policy of continuous improvement and product specification is subject to change
Thefull bandwidth, active surface mount speaker system shall consist of a 110mm (4.50") full range,point source ICT™ transducer mounted in an optimally
tunedvented, injection moulded high impact polystyrene (HIPS) enclosure. The protective grille shall be constructedfrom steel with a weather resistant coating.
Performanceof the Di5a surface mount speaker shall meet or exceed the following criteria: The system shall have a conicalcoverage pattern of 90 degrees
(-6dB).Frequency response measured on axis shall be 90Hz - 30kHz (-10dB from rated sensitivity,average over stated bandwidth. Measured at 1 metre in an
anechoicchamber) with no equalisation. Rated power output shall be 30W RMS and rated maximum SPL shall be 109dB (peak).(Unweighted pink noise input,
measuredat 1 metre in an anechoic chamber).Input sensitivity shall be 775mV (balanced) and 500mV (unbalanced). Input impedanceshall be 11kOhm
(balanced)and 7kOhm (unbalanced). Thermal protection and soft limiting shall be provided.
A6-way Euro-type input / output connector, unbalanced RCA(phono) input and IEC type C13 main input shall all be provided. 2 x M8 yoke bracket inserts are
providedfor use with the supplied yoke bracket.
Thedimensions shall not exceed 240.70 x 155.00 x 162.00mm (9.47 x 6.10 x 6.38”).
Thesurface mount speaker system shall be the.....Di5a.
Architectural specifications