Di5a
TECHNICAL SPECIFICATIONS
|
|
|
|
|
|
System | Di5a |
|
|
|
|
Frequency Response | 100Hz - 25kHz |
|
|
|
|
Frequency Range | 90Hz - 30kHz |
|
|
|
|
Dispersion | 90 degrees conical |
|
|
| |
Driver Complement | 1x 110mm (4.50") |
|
|
|
|
Low Frequency |
|
|
|
| |
| Mineral loaded polypropylene |
| |||
High Frequency | 25mm (1.00") ICTTM |
|
|
| |
Crossover | 7kHz |
| TM |
| |
Directivity Factor (Q) | Inductively Coupled ICT |
|
|
| |
5.3 averaged 1kHz to 10kHz |
| ||||
Directivity Index (DI) | 6.6 averaged 1kHz to 10kHz |
| |||
Rated Maximum SPL (2) | 103dB |
|
|
|
|
Average |
|
|
|
| |
Peak | 109dB |
|
|
|
|
Power Output | 30W RMS |
|
|
|
|
Distortion | 2nd Harmonic | 3rd Harmonic |
| ||
10% Full Power (4.25V) |
| ||||
250Hz | 1.33% | 0.25% |
|
|
|
1kHz | 0.62% | 0.16% |
|
|
|
10kHz | 1.43% | 0.35% |
|
|
|
1% Full Power (1.34V) | 2nd Harmonic | 3rd Harmonic |
| ||
250Hz | 0.41% | 0.10% |
|
|
|
1kHz | 0.23% | 0.07% |
|
|
|
10kHz | 0.32% | 0.18% |
|
|
|
Input Sensitivity | 775mV (balanced) |
|
|
| |
(for maxium input) | 500mV (unbalanced) |
|
|
| |
Input Independance | 11kOhms (balanced) |
|
|
| |
Protection Circultry | 7k Ohms (unbalanced) |
|
|
| |
Thermal |
|
|
|
| |
Supply | Soft Limiting |
|
|
|
|
100 - 240V AC, 50 - 60Hz |
| ||||
Power Consumption | Fuse T1AL 250V |
|
|
|
|
76VA maximum |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Construction |
|
| Enclosure | High impact Polystyrene (HIPS) | ||
| Grille | Steel, with weather resistant coating | ||
| Finish | Textured black or white paint with matching rubber | ||
|
|
|
| trims, Factory fitted custom trim colours available to |
| Connectors | special order | ||
| 6 way | |||
|
|
|
| Unbalanced RCA (phono) input |
| Fittings | Mains inlet IEC type C13 | ||
| 2 x M8 yoke bracket inserts | |||
| Supplied | Yoke bracket | ||
| Accessories |
| ||
| Optional | Pole mount adaptor | ||
| Accessories |
| ||
| Dimensions | 240.7 x 155.0 x 162.0mm (H x W x D) | ||
| NET Weight | 9.47 x 6.10 x 6.38" (H x W x D) | ||
| 2.40kg (5.3lbs) | |||
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
|
|
|
|
| |
PART NUMBER | MODEL NAME |
| COLOUR | PACKED QUANTITY | |
8001 4030 | Di5a (110V) | Black | 2 | ||
8001 4031 | Di5a (230V | UK & EU) | Black | 2 | |
8001 4032 | Di5a | (110V) | White | 2 | |
8001 4033 | Di5a | (230V | UK & EU) | White | 2 |
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T:00 44 (0) 1236 420199
T:00 1 (519) 745 1158
T:00 49 (180) 1111 881
T:00 33 (0)1 7036 7473
E:enquiries@tannoy.com
E:inquiries@tannoyna.com
E:anfragen@tannoy.com
E:ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
