INSTALLATION GUIDLINES
1. Fix the yoke bracket | 2. Feed the speaker |
to the surface using a | cable through the rubber |
suitable fixing method. | grommet then connect |
| the |
| wires, observing the |
| correct polarity. |
3.For connection to the loudspeaker, use pins
1 (+) and 2
Pins 3
Series
4. Offer the speaker up to the bracket and attach using the thumb screws provided.
5. Connect the euro plug then replace the rubber grommet to ensure the speaker is sealed.
6. The DVS 4t models are | 7. The DVS 6t and DVS 8t |
fitted with 30W transformers. | models are fitted with 60W |
THE SPEAKER IS | transformers. |
SUPPLIED IN LOW | THE SPEAKER IS SUPPLIED |
IMPEDANCE MODE. | IN LOW IMPEDANCE MODE. |
NEVER CONNECT THE | NEVER CONNECT THE |
SPEAKER TO A 70/100 | SPEAKER TO A 70/100 |
VOLT AMPLIFIER WHILE | VOLT AMPLIFIER WHILE IT |
IT IS SET FOR LOW | IS SET FOR LOW IMPEDANCE. |
IMPEDANCE. |
|
DVS OWNER MANUAL_05