CONNECTING THE SYSTEM TO YOUR AV RECEIVER

Wire up the system connecting each speaker to the appropriate terminals on the receiver or amplifier making sure that cables connect red to red terminals (+ to +) and black to black terminals (- to - ).

Please note : (+) is shown as grey, (-)is shown as white.

Take care to distinguish between left and right channels and the front and rear channels, as seen from the viewing position.

This is a very important stage in setting up. Getting things wrong at this stage is the most likely reason for disappointing results.

Front Right

Front Left

Centre

Rear Right

F/R

R/R

C

SUB

F/L

R/L

Rear Left

Subwoofer

(+)(-) (RCA cable)

16

Page 16
Image 16
Tannoy Highline 500 owner manual Connecting the System to Your AV Receiver