Using the Expansion Base
3.Verify that your television is displaying the correct video source. Refer to your television documentation for instructions.
4.Press fn+f4 on the notebook to change your video output mode. Press fn+f4 repeatedly to cycle through the available video modes.
5.Refer to the instructions provided with your notebook to configure the television as the primary display or to configure advanced video features.
Connecting Audio
The Expansion Base provides an S/PDIF digital audio jack for an optional digital audio connection. A coaxial digital audio cable (not provided) and an audio receiver (television or stereo) with a coaxial digital audio port is required to fully enable this feature.
To connect digital audio:
1.Connect a coaxial digital audio cable into the orange S/PDIF digital audio jack on the back of the Expansion Base 1.
2.Connect the other end of the cable into the digital audio jack on your television or stereo equipment 2. Refer to your television or stereo equipment documentation for the connector name and location.
Reference Guide |