Using the Expansion Base

3.Verify that your television is displaying the correct video source. Refer to your television documentation for instructions.

4.Press fn+f4 on the notebook to change your video output mode. Press fn+f4 repeatedly to cycle through the available video modes.

5.Refer to the instructions provided with your notebook to configure the television as the primary display or to configure advanced video features.

S-Video Connection

To connect through S-Video:

1.Connect an S-Video cable (not included) into the S-Video jack on the back of the Expansion Base 1.

2.Connect the other end of the cable into the S-Video jack on your television 2. Refer to your television documentation for the connector location.

2–14

Reference Guide