11. Technical Specifications
Frequency Response (1) +/- 3dB
Recommended Amplifier Power
Power Handling(2)
Sensitivity (1) 2.83 volt @ 1m
Maximum SPL (3)
@1m
Impedance
DI Averaged (PCQ)
@ 1kHz (ISO) @ 2kHz (ISO) @ 4kHz (ISO) @ 8kHz (ISO)
@ 16kHz (ISO)
Q Averaged (PCQ)
@ 1kHz (ISO) @ 2kHz (ISO) @ 4kHz (ISO) @ 8kHz (ISO)
@ 16kHz (ISO)
Distortion
0.1 Full Power
250 Hz
1000 Hz
10000 Hz
0.01 Full Power
250 Hz
1000 Hz
10000 Hz
Driver Complement
Crossover Point
60Hz - 22kHz
37Hz - 22kHz (with Tx2 controller)
250 - 500 watt / 8 ohm
Average | Programme Peak (10ms) | |
250 watt | 500 watt | 1000 watt |
99 dB |
|
|
Average | Peak | |
123 dB | 129 dB | |
Nominal | 8.0 ohm | |
Minimum | 6.0 ohm | |
9.97, 500 Hz - 16 kHz 8.5 9.1 9 12.5 14.15
11.92, 500 Hz - 16 kHz 7.1 8.1 7.9 17.8 26
2nd Harmonic | 3rd Harmonic |
0.18% | 0.44% |
1.77% | 1.77% |
1.58% | 0.11% |
2nd Harmonic | 3rd Harmonic |
0.09% | 0.09% |
0.50% | 0.71% |
0.56% | Below measurement limit |
1 x 15” (381mm) Constant Directivity Dual Concentric Type number 3804
Passive 1.6kHz
3rd order high pass, 2nd order low pass Halogen HF protection
Enclosure | 65 litre vented, MDF |
Finish | Textured black\grey paint |
Connectors | 2 x Speakon NL4MPR IN/OUT |
Fittings | 8 x M8 flying inserts & 1 x M8 pullback point |
Dimensions | 590mm(H) x 450mm(W) x 420mm(D) |
| 23.2ins(H) x 17.71ins(W) x 16.54ins(D) |
Weight | 24 Kg (52.8 lbs) |
NOTES:(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2)Long term power handling capacity as defined in EIA standard RS - 426A.
(3)Unweighted pink noise input, measured at 1m in half space conditions.
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
