Targus DVD401 Storing Your DVD Player in the DVD Player Case, Viewing Case Disk Panel

Targus DVD401 Road Warrior Portable DVD Player Case

3Put another mounting strap around the upper part of the same front seat.

4Move the strap to where your shoulders would rest against the seat.

5Position each straps’ set of swivel clasps toward the center of your car to where the viewing case will be mounted.

6Repeat steps 1 -5 to fit the other two mounting straps on the other front seat.

Mounting the viewing case

1Hold the viewing case between the seats so that the DVD player is facing rearward.

2Attach the two lower mounting straps’ swivel clasps to the viewing case’s front and rear D-rings closest to the clasps.

You should have attached four swivel clasps, one to each D-ring.

3Attach the two upper mounting straps’ swivel clasps to the viewing case’s front and rear D-rings closest to the clasps.

You should have attached four more swivel clasps, one to each D-ring, for a total of eight.

Connecting mounting straps to D-rings

4Adjust and tighten each strap so that the DVD player is at the desired viewing angle and the viewing case is secure.

Storing Your DVD Player in the DVD Player Case

Once inserted in the viewing case, you can store your DVD player in the DVD Player Case when not in use.

1Close your DVD player.

2Unfasten the two elastic snaps.

3Close and zip the viewing case.

4Fasten the two elastic snaps to the bottom of the viewing case.

5Insert the viewing case in the larger pocket of the DVD Player Case and zip the pocket.

The Viewing Case Disk Panel

The viewing case has a fold-away disk panel to hold DVDs. This is in addition to the DVD storage capacity in the DVD Player Case itself.

7