Targus Wireless
Batteries | 1 internal lithium polymer |
Operating Current | Mouse: |
| 35mA or lower |
| Receiver: |
| 30mA (typical) (100mA maximum) |
Mouse Standby |
|
Current | 4.5 mA (for 30 seconds of |
Mouse Flash Mode | Below 2.8mA (for 20 minutes of non- |
Current | operation) |
Mouse Sleep Mode |
|
Current | Below 8µA |
Modulation Type | FSK |
Transmission Rate | 5K bps |
Transmission Type | Digital radio frequency |
Error Detection |
Troubleshooting
What do I do if the mouse does not work?
•Make sure that the mouse is fully charged.
•Verify that your computer’s power management feature is turned off.
•Check that the receiver’s USB connector is firmly attached to the USB port on your computer.
•Make sure you have established a radio link between the mouse and its receiver. See “Establishing a Communications Link” on page 4.
10
