7
3Click Next.
The Install Hardware Device Drivers screen appears.
4 Select “Search for a suitable driver from my device (recommended)” and click Next.
If you are running the Windows® XP operating system, select “Install from a list or specific
location (Advanced)” and enter C:\cardbus, or click Browse and locate the CardBus folder, and
skip to step 6.
The Locate Driver Files screen appears.
5 Select “Specify a location” and enter C:\cardbus or click Browse and locate the CardBus folder.
6Click OK.
The Driver Files Search Results screen appears.
7Click Next.
8 If the Digital Signature Not Found dialogue box appears, click eith er Yes or Continue anyway to
continue.
9Click Finish to complete the driver installation .
You are now ready to begin using your external drive with the Cardbus card cable and enhanced
performance driver.
Using the External Drive

Inserting and Removing a Disc

1 Turn on your computer and press the eject button to open the tray.
2 To insert a disc, hold it by the edges and place it in the tray with the readable (plain) side down.
If you are using a high capacity disc, place the side of the disc you want the drive to read fac ing
down. Then, gently press down on the disc until it snaps into place.
3 To remove a disc, grasp it by the edges and gently pull up until the disc is released.
CAUTION: Avoid touching the readable (plain) side(s) of a disc. Touching the readable side of th e disc
may cause read errors, poor performance or failed operation.
ComboDrive.book Page 7 Thursday, October 10, 2002 1:15 PM