Targus USB-2.0 Mobile specifications Jack

NOTES: The USB 2.0 Mobile Mini Hub is backward compatible, so you can connect it to a computer with either a version 1.1 or 2.0 USB interface.

When using the mini hub with a computer that has a version

1.1USB interface, all of the devices attached to the mini hub will run at a version 1.1 USB speed.

Connecting the Mini Hub to Your Computer and Installing the Default Device Drivers

To connect the mini hub to your computer and install the operating system’s default drivers:

1Plug the supplied high-speed cable’s USB connector end (type A) into a USB port on your computer.

2Plug the cable’s other connector end (type B) into the mini hub.

AC power	USB port
jack	(type B)

Mini hub - AC power jack and USB port (type B)

3Connect the supplied AC power adapter to the AC power jack on the mini hub, then plug the adapter into an available electrical outlet.

Your computer’s operating system automatically detects the new hardware and begins installing the appropriate default drivers.

4Follow the on-screen instructions to complete the driver installation.

You can now connect USB devices to the mini hub or daisy- chain additional hubs.

3