Targus Wireless RF Mouse Connecting the Mouse, Receiver and Installing the, Device Drivers, System Requirements

Targus Wireless RF Mouse 3

System Requirements

To use the RF mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below.

Hardware	Operating System
• PC with a Pentium® processor or	• Windows® 98/Me/
equivalent and a hard disk drive	2000/XP
• USB version 1.1 interface

NOTE: The third button and the scrolling wheel only work with the operating systems listed above. If you use the RF mouse with a different operating system, it will lose its enhanced features and function as a standard, two-button mouse.

Connecting the Mouse

Receiver and Installing the

Device Drivers

To connect the mouse receiver:

1Turn off your computer.

2Plug the standard USB end of the cable into an available USB port on your computer.

You are now ready to install the device drivers for your operating system.