Targus Wireless RF Mouse Operating Hints

Targus Wireless RF Mouse 7

The receiver’s status light flashes while it scans the identification codes for the mouse. Once a code is selected, the status light stops flashing.

3Press and release the screen scroller (middle) button.

You are now ready to use the RF mouse.

NOTE: You must reestablish the communications link every time you change the batteries.

Operating Hints

For optimal performance and RF reception:

•Place the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor, speakers or external storage devices.

•Avoid using the RF mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio frequency transmission and may slow down the mouse’s response time or cause the mouse to fail temporarily.

•The RF mouse will enter a suspend mode at the same time your computer does. To wake the mouse, press and release the screen scroller (middle) button.

•If your computer has a metal case that contains aluminum or magnesium, use the RF mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the computer.