5

WAV File Import/Export Functions (Continued)

Section I

WAV Export Troubleshooting

When exporting files to CDs, there are a few limitations on how much data can be moved at a time. (For instance, all of the selected WAV files must be able to fit on a single CD.) These messages may appear if you exceed one of the limitations.

"SELECTION EXCEEDS CD CAPACITY"

This indicates that you've selected more data than a CD can hold. You'll have to export a few tracks to one CD, and the rest of the tracks to another.

"TOO MANY TRACKS"

The 788 can only export up to 99 tracks at a time. If you run into this limitation, simply export 99 tracks on the first CD, then export the rest on a second pass.

"NO SPACE ON DISK FOR IMAGE FILE"

Before burning the data to CD, the 788 temporarily assembles all of the data on the hard drive. This message indicates that there is not enough space on the drive to create that working copy.

If you run into this problem, you need to generate some free space on the drive to enable the function to continue. Here are three simple ways to do it:

1)Erase Unwanted Songs - If you've got some old songs hanging around your drive that either you don't want, or you have backed up somewhere, delete them.

That's the easiest way to free up space.

2)Use DELETE UNUSED - This function gets rid of data that is not being used in a song without destroying the song itself. It may free up enough space on the drive to allow the WAV file image to be generated. See p30 of the 788 Owner's Manual for more information.

3)Add More Space - You can add an external drive to the SCSI port on the 788 to give you more space. If you format the external drive to the 788 format, the 788 can use the space on the added hard drive for assembling the CD data.

WAV File Import

1)Place the CD-ROM with the WAV files in the CD recorder drive.

2)Press MENU.

3)Select , and press

ENTER.

4)Select , and press ENTER. The 788 will display all WAV files on the CD-ROM.

5)Select a WAV file to import by highlighting the file, and pressing enter. (The 788 can only import one WAV file at a time.)

6)The 788 will show you a list of virtual tracks in the 788. Choose the virtual track that you want the WAV file to load into and press ENTER. (The 788 will only display

empty virtual tracks, to prevent you from overwriting existing tracks.)

7)After the 788 loads the track, it will ask you if you have any other tracks you wish to load at this time. Press ENTER/YES or EXIT/NO.

When the WAV files are loaded into virtual tracks, the name of the WAV file is assigned to the virtual track. So, if you load KICKDRUM.WAV into a virtual track, that virtual track is now named KICKDRUM.WAV. This makes it easier to find those files once you've imported them.

WAV IMPORT TROUBLESHOOTING

If the 788 does not see WAV files on the CD-ROM, there are a few CD formatting issues to check. Try placing the CD-ROM in a computer, and look for these signs:

1)Make sure the CD-ROM is formatted as ISO-9660, Level 1. - If the CD Authoring program you used (like EZ CD Creator, Toast, or Nero) allowed for file names that exceed the "eight-dot-three" file naming scheme, then you don't have the appropriate format. (See the "About ISO-9660" section on the previous page.)

If the names do follow the Level 1 requirement, it is still possible that the names are the appropriate length, but the CD is the wrong CD format.

To solve this problem, simply burn the WAV files to CD again, with the CD set to ISO-9660 Level 1 format. Rename files as needed to fit the naming scheme.

2)Make sure the WAV files are in the root directory of the CD. If you open the disc on the computer, all of the files should be immediately apparent. You should not have to open any folders inside the disc. If the WAV files are in subdirectories, simply burn the disc again with the WAV files in the root directory.

3)Make sure the WAV files are mono files, at 44.1kHz, either 16 or 24 bit. The 788 cannot import stereo WAV files. Stereo sources should be imported as two mono WAV files - one each for the left and right side.

4)Make sure the files have the ".WAV" extension. The 788 may not recognize the files otherwise.

TASCAM 788 v2.0 Addendum • 7/2002 Edition

WAV File Import/Export Functions

Page 4 Page 6
Page 5
Image 5
Tascam 788 manual WAV Export Troubleshooting, WAV File Import
Page 4 Page 6

788 specifications

The Tascam 788 is a portable digital audio workstation that made a significant impact in the realm of music production and recording. Launched in the early 2000s, the 788 is particularly well-regarded for its blend of portability, versatility, and quality. Aimed primarily at musicians, podcasters, and sound designers, this device caters to those who need a reliable means to capture high-fidelity audio in various environments.

At the heart of the Tascam 788 is its ability to record up to eight tracks simultaneously, offering a total of 24 tracks for playback. This multi-track capability allows users to layer instruments and vocals, creating rich, full-bodied productions. Each track supports high-resolution recording at 24-bit/96kHz, providing professional quality that rivals many studio setups. The onboard effects and mixing capabilities further enhance its functionality, allowing users to manipulate their recordings in real-time.

The Tascam 788 features a user-friendly interface with a large LCD screen, making navigation straightforward. It includes a variety of inputs, including XLR and TRS, making it flexible for different microphone types and instruments. The device also has built-in phantom power for condenser mics, ensuring that you can capture clear audio with minimal external setup.

One of the standout features of the Tascam 788 is its integrated CD-RW drive, allowing users to burn audio directly onto CDs without needing a computer. This is particularly useful for artists wishing to create demo discs or share their music with others quickly and easily. Additionally, the presence of a USB port means that users can connect the device to a computer for further editing and file management, making it easy to integrate with digital audio software.

The Tascam 788 employs a compact and rugged design that is ideal for mobile musicians and recording engineers. Weighing less than many of its contemporaries, the device can be easily transported, making it suitable for on-the-go recording sessions. The long battery life adds to its portability, enabling recordings without the constant need for a power source.

In summary, the Tascam 788 stands out as a versatile tool for both novice and professional audio creators. With its multi-track recording capabilities, high-quality audio, and portable design, it remains a beloved choice for those looking to capture and produce music seamlessly and effectively. Whether in a studio or on the road, the Tascam 788 brings together essential features that cater to the diverse needs of today's audio artists.
Top Page Image Contents