2 – Part Names and Functions

When start and end points are not set, this turns repeat playback on and off. (See “Repeating playback of a track” on page 34.)

Press the IN/OUT/MARK key while pressing and holding this key to clear the corresponding start/end/ marker point.

;IN key

Use this key to set the start point for loop playback of a desired interval.

Press this key while pressing and holding the LOOP key to clear the start point. (See “Repeating playback of a set interval (loop playback)” on page 34.)

zOUT key

Use this key to set the end point for loop playback of a desired interval.

Press this key while pressing and holding the LOOP key to clear the end point. (See “Repeating playback of a set interval (loop playback)” on page 34.)

xMARK key

Press this to set a marker point at the desired position in a track. Press this key while pressing and holding the LOOP key to clear the marker point currently shown on the Home screen. (See “Setting marker points where desired in tracks” on page 34.)

Front Panel

cFRONT MIC L/R

This is a built-in stereo pair of microphones. The left microphone is also used when tuning.

vPower indicator

This indicator lights when the power is ON.

bVolume/playback/recording indicator

When adjusting the volume, the number of green LEDs lit shows the volume.

The center LED lights green during playback. The center LED lights red during recording.

When using the metronome function, the green light moves left to right along with the tempo.

When using the chromatic tuner function, the LEDs indicate the difference between the detected and desired pitches.

nRemote sensor

This receives signals from the included remote control unit (RC-BB1000). Point the tip of the remote control at the sensor when operating the unit with it.

TASCAM BB-1000CD/BB-800 11