Powering the unit

You can power the unit with the included AC adaptor or commercially-available AA batteries.

CAUTION

You cannot record on a CD when operating on battery power. Use the AC adaptor.

Connecting the AC adaptor

Connect the AC adaptor to the unit, the power cord to the AC adaptor, and the power cord to an AC outlet.

TASCAM PS-1225L

DC plug

Power cord holder

AC outlet

The left side panel of the unit has a power cord holder indentation for fastening the cable of the AC adaptor. Insert the cord into the holder to prevent accidental disconnection of the cord.

3 – Preparation

Installing batteries

Remove the battery compartment cover and install 8 commercially-available AA batteries following the polarity indications on the case.

NOTE

Batteries are not supplied with this product. . We recommended using Ni-MH or alkaline batteries.

Preparing the remote control

Installing the battery

1Pull the battery holder out of the remote control.

2Put a lithium coin battery (CR2025) into the holder with the + side up.

CAUTION

•• Do not force the power cord into the holder. Doing so could damage the cord.

•• Uninstall the batteries when using the included AC adaptor to prevent battery consumption.

3Put the battery holder into the remote control.

Battery replacement

Replace the battery when the operation range decreases or the unit does not respond to keys pushed on the remote control unit.

Use a lithium coin battery (CR2025) for replacement.

TASCAM BB-1000CD/BB-800 15