3 – Preparation

Precautions about using the remote control

•• Remove the batteries if you do not plan to use the remote control for a long time (longer than a month).

•• Using this remote control while other equipment that can be controlled with infrared rays is operating nearby might cause that equipment to function improperly.

•• Aim the remote control unit at the remote sensor. Obstacles could interfere with operation by the remote control.

Remote sensor

Ô ˚

 ¯

STOP PLAY/READY

ª ¥/π

RECORD

º

Operating distance Head-on to the sensor: 7 m

15° left/right from the sensor: 4 m

Turning the power on and off

Turning the power ON

Slide the POWER switch on the left side of the unit to ON. The Home screen opens after the startup screen disappears.

Turning the power OFF

Slide the POWER switch to OFF.

CAUTION

Do not turn the power OFF when a media indicator (CD or SD) is flashing because the unit is writing data.

Setting the date and time

Set the current date and time of the built-in clock. The time information of files recorded by this unit to an SD card is

based on this setting.

1Press the HOME key to open the Home screen.

2Press the MENU key to open the MENU screen.

3Use the DATA wheel or CURSOR [§/] keys to select SETUP, and press the ENTER key.

The SETUP screen appears.

4Use the CURSOR [§/] keys to select the DATE/TIME item, and press the ENTER key.

The DATE/TIME screen appears.

5Use the DATA wheel to adjust the value. Use the

CURSOR [§//˙/¥] keys to move the cursor.

6After making the setting, press the F1 key to to return to the SETUP screen and start the clock.

16 TASCAM BB-1000CD/BB-800