Tascam manual Using an AC adapter, Switching on the unit, Auto power-save, TASCAM CD-VT1

Models: CD-VT1

1 16
Download 16 pages 42.59 Kb
Page 6
Image 6
Using an AC adapter

First steps with your CD-VT1

hen the battery level drops the unit automatically shuts down and must be restarted with the POWER switch after the batteries have been replaced

ote that the battery indicator on the display only provides a rough estimate of remaining battery life and under some circumstances there may not be enough power in the batteries to power the  despite the battery power indication on the display

Using an AC adapter

nly use a   adapter not supplied sing another type of  adapter may damage your  

lways make sure that the  voltage matches the voltage written on the  adapter

NOTE

Always remove batteries when operating the unit with an AC adapter. If batteries are ac- cidentally left in the unit when it is operated with an AC adapter, always switch off the

unit before changing from AC adapter to battery power or switching from battery to AC adapter operation.

Switching on the unit

e  has two power switches se the first POWER switch sliding switch to turn the power to the whole unit on and off

e second switch MIC ON/OFF controls the power to the MIC jacks and effect unit f this section is off you cannot use these jacks or use any of the vocalrelated menu systems effect and voice changer

lso note the HOLD switch that locks the s controls and keys when it is in the ON position HOLD appears in the display when this switch is on

Auto power-save

f the unit is powered using batteries for more than  minutes in stop mode or with no disc loaded or opened the  player shuts down display shows CD OFF but you can still use the vocal section

estart the  player alone by using the y/J key or use the POWER switch if both the  and vocal sec tions are turned off

6 — TASCAM CD-VT1

Page 6
Image 6
Tascam manual Using an AC adapter, Switching on the unit, Auto power-save, First steps with your CD-VT1, TASCAM CD-VT1