Tascam FW1082 manual Additional Transport Keys, Transport Wheel, Special Keys, SELect Keys

Control Details

Generally the FW­1082’s surface controls will function as expected, controlling their like parameters in Sonar. For example: Faders, Mutes, Solos and Transport Control will control those parameters in Sonar. Exceptions and specific details follow:

Additional Transport Keys

SET + REW = RTZ SET + FF = Go to Tail

IN locates to the beginning of the selection area OUT locates to the end of the selection area

SET + IN sets Punch IN point at the current playhead position SET + OUT sets Punch OUT point at the current playhead position

SET + REC starts automation recording. A parameter must be armed for automation. SHIFT + SET + IN sets Loop In Point at the current playhead position

SHIFT + SET + OUT sets Loop Out Point at the current playhead position SHIFT + IN = sets Selection In Point at the current playhead position SHIFT + OUT = sets Selection Out Point at the current playhead position <<LOCATE locates to previous marker

LOCATE>> locates to next marker

SET + LOCATE>> = Drop Marker at the current playhead position

Transport Wheel

·Turn the data wheel clockwise to jog forward or counter­clockwise to jog backward.

·When the SHTL key is off, the data wheel moves the transport in one measure steps. Holding the SHIFT keyreduces this to one­beat steps.

·When the SHTL key is on, the data wheel moves the transport in 1000­tick steps. Holding the SHIFT key reduces this to 100­tick steps.

Special Keys

SHIFT + PLAY toggles the Audio Engine On/Off

SHIFT + STOP Resets Sonar

SHIFT + any SOLO key will un­solo all tracks.

SELect Keys

Pressing an FW­1082 SELect key alone will select that channel in Sonar. Holding SHIFT while pressing SELect sets that channel’s fader to Unity in Sonar.

Holding the red REC keywhile pressing a SELect key will record­enable/disable that track.