2 – Part names and functions

Rear panel

c ~ IN

Use the supplied power cord to connect the amp

c to an AC power outlet. Confirm that the voltage matches that marked on the rear panel of your GA-30CD amp.

CD Trainer LCD

vbn m

, .

 

MENU

/! @

# $

vPLAY indicator

Appears during playback.

bPAUSE indicator

Appears when playback is paused.

nREMAIN indicator

When no track number appears, this indicates that the remaining time of the entire CD is being shown on the time display. When the track number also appears, this indicates that the remaining time of the currently playing track is being shown. (See “Changing the time display mode” on page 16.)

mTUNER indicator

Appears when the tuner is in use. (See “Using the tuner” on page 18.)

,SET UP/MENU indicator

Blinks when the Setup menu is active. (See “Changing settings” on page 19.)

NOTE

US models show the indicator MENU in this position while European models show the indicator SETUP. The function is the same.

.Tuning meter

Shows pitch during tuning. The center is the correct pitch. The more the indicator lights to the left, the flatter the pitch and the more it lights to the right the sharper the pitch.

/LOOP indicator

Appears when set to loop playback (ALL/SGL). (See “Repeat playback of a selected loop” on page 16.)

!1

Appears when set to single (SGL) repeat playback.

@I-O

Blinks when the loop repeat IN point is set and lights when the OUT point is set.

#Track number/time display

Shows the currently selected track number (above TRACK) and time during playback in minutes (M) and seconds (S). Also provides information when making various settings.

$ ,

Shows pitch when key adjustment is ON.

NOTE

Some models show these symbols as white on a black background. The function is the same.

TASCAM GA-30CD 11

Page 11
Image 11
Tascam GA-30CD owner manual Rear panel, CD Trainer LCD