TASCAM
Protocol width
Since fixed parameter widths for messages might be preferable depending on the device, the
Protocol Width=Fixed
Protocol Width=Variable
Logging in
After turning the power on, the
Login=hdr1
Login Succeeded
Logging Out
By sending the following command after logging in, you can log out of the session.
Logout
Logged Out
Software Version
Sending this command causes the
Version?
Version=1.0
4. Command details
4.1 Direct transport commands
Since the potential behavior of keys (PLAY, STOP, etc.) changes depending on the current transport state, sometimes they do not respond as intended. Direct transport commands do not depend on the current transport state, however, and this can be advantageous in some circumstances. For example, by sending a “Record” direct transport command, the
The following is an example of the usual format of a direct transport command.
|
| Parameter ID |
| Cmd |
| Value |
| End Marker |
|
|
|
|
|
|
|
|
|
Character string |
| Transport |
| = |
| <Value> |
| LF (or CR+LF) |
|
|
|
|
|
|
|
|
|
6 | TEAC Corporation |