4–Recording

7Use the SHUTTLE/DATA wheel to select Channels, and press the ENTER key.Set the record channel mode with this item.

8Use the SHUTTLE/DATA wheel to select the channel mode, and press the ENTER key.

•• Stereo: records in stereo

•• Mono Right: records R channel input in mono

•• Mono Left: records L channel input in mono

9Use the SHUTTLE/DATA wheel to select Input Source, and press the ENTER key.Set the record input source with this item.

10Use the SHUTTLE/DATA wheel to select the record input source, and press the ENTER key.

•• Analog/Mic: sets the input source to the MIC/LINE INPUTS (XLR, RCA or Euro connectors) on the rear panel

•• S/PDIF: sets the input source to the DIGITAL IN jack on the rear panel

NOTE

If Analog/Mic is selected, the switches on the rear panel also need to be set. See step 13 below.

11As necessary, conduct other settings related to recording.

See “Record settings” in the Owner’s Manual for more details about those items.

12 When setting is completed, press the MENU key to return to the Home Screen.13 If Analog/Mic was selected in procedure

10 above, set the switches on the rear panel according to the analog input used as follows.

When using XLR inputs:

•Set the INPUT switch to XLR.

•Set the L INPUT and R INPUT switches to 0 or −20.

If the input level is too high, use the −20 setting, which engages a 20 dB pad.

•If a condenser mic that requires +48V phantom power is connected set the PHANTOM switch to ON.

When using the Euroblock:

•Set the INPUT switch to TRMNL

When using the RCA INPUT:

•Set the INPUT switch to XLR.

•Set the L INPUT and R INPUT switches to RCA.

12 TASCAM HD-R1