Tascam HD-R1 Making connections, Connecting the power, Connecting output destinations, Connecting the recording source, Connecting USB memory to copy files

3–Preparations for Use

Making connections

Headphones

USB media
USB computer	LAN Cable
keyboard

Computer

Mixer

Connecting the power

Connect the included power cord to the ~IN connector on this unit and a standard power outlet.

Connecting the recording source

Connect analog sources to the MIC/LINE INPUTS or the Euroblock. Balanced mics and line level sources can be connected to the XLR jacks, −10 dBV unbalanced line level sources can be connected to the RCA jacks, and +4 dBu balanced sources can be connected to the Euroblock.

Connect digital sources to the DIGITAL IN jack. (This unit accepts S/PDIF digital, but does not accept AES/ EBU digital sources.)

Connecting output destinations

Use the XLR or RCA LINE OUTPUTS or the Euroblock to connect analog output destinations.

Use the DIGITAL OUT jack to connect digital output destinations. (This unit works with S/PDIF, but not with AES/EBU digital sources.)

External controller Power outlet

Connecting headphones for monitoring

Connect stereo headphones to the front panel PHONES jack.

Connecting a keyboard for text input

Connect a USB keyboard to the front panel USB port.

Connecting USB memory to copy files

Connect the USB media (flash memory) to the front panel USB port.

Connecting an external parallel controller

Connect a parallel controller to the PARALLEL connector on the rear panel.

Connecting an external serial controller

Connect a serial controller to the RS-232Cconnector on the rear panel.

Connecting a LAN cable for remote control and file transfer

Connect the unit using the LAN connector on the rear panel.

TASCAM HD-R1 7